The BW Technologies XT-XWHM-Y-NA GasAlertMax XT II 4-gas detector with pump is a handheld, four-gas detector that uses an electrochemical cell sensor to monitor ambient H2S and carbon monoxide (CO), a capillary pore fuel cell to measure oxygen levels, and a catalytic bead sensor to monitor ambient combustible gases continuously. It has audio, visual, and vibration alarms, which alert simultaneously when gases reach any of four preset levels. The integrated diaphragm pump allows for localized sampling of the atmosphere for more precise readings than those generated through diffusion. The detector has an alphanumeric LCD screen that shows real-time concentration of four monitored gases, the alarm type, the calibration requirements, the self-test pass or fail, and the battery life remaining. The LCD also displays a constant flashing heartbeat icon to indicate normal functioning. The detector is operated and adjusted with a single push button. It is used to indicate potentially harmful levels of gases naturally occurring in the environment; in a variety of occupational settings such as petroleum refineries, tanneries, sewage treatment facilities, and paper mills; and in other personal safety, educational, and ambient monitoring applications. This detector is set to alert to when gas levels reach any of four limits: a low-alarm level, indicating moderate danger; a high-alarm level, indicating significant danger; a short-term exposure limit (STEL), the maximum gas concentration to which workers can be exposed continuously for a short period of time without serious risk; and a time-weighted average (TWA) limit, the maximum average exposure that personnel can experience over an eight-hour work shift without serious risk. The 95 dB audible alarm sounds at different speeds to indicate the alarm type, and the three bright, wide-angled LED alarm bars and the built-in vibration alarm help alert the user to potentially dangerous levels of gases in high-noise conditions. The detector logs and retains data of the 10 most recent...
The Macurco TX-6-ND is a low voltage, dual relay Nitrogen Dioxide (NO2) detector, controller and transducer. NO2 is a toxic chemical of concern in diesel exhaust. The TX-6-ND has selectable 4-20 mA output, buzzer and digital display options. It is an electronic detection system used to measure the concentration of NO2 and provide feedback and automatic exhaust fan control to help reduce NO2 concentrations in parking garages, loading docks or other commercial applications. The TX-6-ND is a low level meter capable of displaying from 0-20 ppm of Nitrogen Dioxide.
Sensorcon Waterproof Intrinsically Safe Carbon Monoxide Detector and Pump Kit
Manufacturer: Sensorcon, Inc.
Model: Carbon Monoxide Inspector Industrial Kit
Color: Black with green lettering
Carbon Monoxide Inspector Industrial with Complete CO Meter & Analyzer Pump Kit Accurately measures CO gas concentrations from 0 - 1999 ppm Certified Intrinsically Safe to UL913 for Class I & II explosive hazardous environments The complete analyzer kit includes the Carbon Monoxide Inspector Industrial, a High quality certified intrinsically safe portable CO detector, a carrying case, and a hand aspirated pump & filter for sampling air or exhaust for CO. Designed & Made in the USA.*Please note that there will be a 15% restocking fee for units that are returned that are not defective*
Macurco CM-6 Carbon Monoxide CO (Low Voltage) Fixed Gas Detector Controller Transducer
The Macurco CM-6 is a low voltage, dual relay Carbon Monoxide (CO) detector, controller and transducer. The CM-6 has selectable 4-20 mA output, buzzer and digital display options. It is an electronic detection system used to measure the concentration of CO and provide feedback and automatic exhaust fan or valve control to help reduce CO concentrations in parking garages, maintenance facilities or other commercial applications. The CM-6 is a low level meter capable of displaying from 0-200 ppm of Carbon monoxide.
Surface mount fire extinguisher cabinet for indoor/outdoor use. Capacity 20 or 30 lb. Poly Carbonate windows that block UV rays. Cabinet color Black/Red, window color clear. Protect extinguishers from exposure to dirt, dust, water, and chemicals. Hook-and-loop straps keep extinguisher secure inside.
The BW Technologies GAXT-M-DL GasAlert Extreme carbon monoxide (CO) single gas detector is yellow in color, has a measuring range of 0 to 1,000 parts per million (PPM), and can be used to detect the presence of carbon monoxide to help prevent poisoning. An LCD on the detector can display carbon monoxide readings and historical data in different languages. The detector performs a self-test upon startup to ensure that it is properly functioning. An optional vibrating alarm causes the detector to vibrate when gas is detected and is suitable for use in noisy areas. The detector's housing resists water. A built-in boot helps protect the detector from drops. A pass code can be used to prevent unauthorized access. The 3-volt battery has an average lifespan of up to 1-1/2 years and can be replaced. The carbon monoxide detector measures 3.75 x 1.03 x 2 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) It can operate in temperatures between -22 and 122 degrees F. This product is suitable for use with a BW Technologies MicroDock II automatic test and calibration station (sold separately).A gas detector is a safety device that detects and monitors various toxic, combustible, and flammable gasses in an area, and which can also register a decrease in ambient oxygen. Gas detectors can be portable or stationary, and are typically classified by their detection methods, which include catalytic, electro-chemical, point infrared, open-path infrared, semiconductor, thermal path conductor, and paper tape detection. Gas detectors are first calibrated to known gasses that serve as a reference points. Their sensors can then be used to measure ambient gas concentrations in comparison to the calibration gasses. When gas concentrations exceed a pre-set limit, an alarm or signal is triggered, alerting the user to potential danger. Pre-set limits often include a low-alarm level, indicating a gas ...
Fieldpiece ACM3 Carbon Monoxide Detector Accessory Head
Manufacturer: Standard Plumbing Supply
The ACM3 is a carbon monoxide detector (CO detector) accessory head for use with our modular instruments. It has a very fast reaction time thanks to an electrochemical sensor is specific to carbon monoxide (CO). This rugged instrument can help you hunt down sources of potentially life-threatening, poisonous gas.
First Alert CO615 Carbon Monoxide Plug-In Alarm with Battery Backup and Digital Display (6 Pack)
Manufacturer: First Alert
Brand: First Alert
Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don't know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you're in danger at first. That's why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can't see, smell or taste in the air. The First Alert CO615 carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. Installation is as simple as plugging it in to any wall outlet. Its easy-to-read backlit digital LED display gives you a clear read-out of current CO concentrations in parts per million. The alarm includes a battery back-up giving you peace of mind in a power outage. The test/silence button both silences a non-threatening alarm or low battery warning and allows you to test the unit's functionality. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-decibel horn. An audible and visual low battery signal alerts you to replace the battery and an indicator alerts you when a battery has been removed. An end-of-life alarm of three chirps alerts you to replace the unit.